This short video will show you how to connect to the Roco ®WLAN multimaus through the internal DR5000 Wi-Fi.


DR5000 settings

Step 1: Connect your laptop/phone to the internal DR5000 Wi-Fi 
Step 2: Open the LAN settings on the DR5000 software
Step 3: Change the DR5000 protocol to Z21


WLAN multimaus setttings

Step 1: Power on the WLAN multimaus
Step 2: Select the arrow button (bottom left) and the menu button to go to the menu. Navigate to the Settings menu with the top arrow buttons.
Step 3: Select the Wi-Fi menu, press OK when you see SSID, press OK when you see search. The search will now start.
Step 4: Select the DR5000-Serial SSID, enter the default password, and press OK.
Step 5: Select the Z21 IP option and change the ip to 192.168.16.254 and press OK.

Please note if you are not using the internal DR5000 Wi-Fi, the procedure is the same, but you need to use the IP address that is shown on the main screen of the DR5000 software.